Table of Contents
Advertisement
SPECIFICATIONS
Model NO.
ZF36D03F
Dimension
36" x 4.2" x 16"
(W x D x H)
Voltage
Rating
Frequency
PRE-INSTALLATION
GROUNDING INSTRUCTIONS:
This heater is for use on 120 volts. The cord has a plug as shown at (A)
in figure 1. An adapter as shown at (C) is available for connecting
three-blade grounding-type plugs to two-slot receptacles. The green
grounding lug extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet box. The
adapter should not be used if a three-slot grounded receptacle is
available.
NOTE: Adapters are NOT for use in Canada
PLANNING INSTALLATION
Before you begin assembly, locate the instructions and hardware. Compare all parts with the Hardware Included and
Package Contents lists. Be sure you have all the parts and can identify them. A helping hand is always good.
Assemble your fireplace with an adult assistant if possible. Some pieces are heavy and will need to be held by a
helper. Assembly time will take approximately 5-20 minutes.
CAUTION: This carton includes a GLASS panel! Always use extreme caution when handling glass.
Failure to do so could result in personal injury or property damage.
TOOLS REQUIRED (not included)
Safety goggles
42" x 4.2" x 16"
120 V
1400 W
60 Hz
Phillips screwdriver
ZF42D03F
50" x 4.2" x 18.6"
120 V
1400 W
60 Hz
04
ZF50D03L
60" x 4.2" x 18.6"
120 V
1400 W
60 Hz
Grounding Pin
Cover of Grounded Outlet Box
Adapter
Grounding Lug
Metal Screw
Cover of Grounded Outlet Box
Power drill
ZF60D03L
120 V
1400 W
60 Hz
Figure 1
A
B
C
Advertisement
Table of Contents
