Related Manuals for CAMBRIDGE MAYTRX PLUS SPLIT FACE WALL FIREPLACE
Summary of Contents for CAMBRIDGE MAYTRX PLUS SPLIT FACE WALL FIREPLACE
- Page 1 CAMBRIDGE FULLY ASSEMBLED MAYTRX PLUS SPLIT FACE WALL FIREPLACE CHIMENEA DE PARED DE CARA DIVIDIDA MAYTRYX PLUS DE CAMBRIDGE TOTALMENTE ENSAMBLADA...
-
Page 2: Guía De Referencia
Cambridge Fully Assembled Maytrx Fireplace Layer Reference Guide: Guía de Referencia: Fireplace Dimension: 60” Wide 44” Deep 107” High Fireplace Weight: 7,509 lbs. Chimenea Dimensión: 60” Ancho 44” Profundo 107” Alto Chimenea del horno: 7,509 lbs. - Page 3 Cambridge Fully Assembled Maytrx Fireplace Layer Reference Guide: Guía de Referencia: BOTTOM UNIT DIMENSIONS 60" WIDE X 44" DEEP X 114" TALL TOTAL WEIGHT 7509 This unit is installed the same way as all fully assembled fireplaces and pizza ovens. Please use...
- Page 4 Cambridge Fully Assembled Maytrx Fireplace Layer Reference Guide: Guía de Referencia: ARRIBA ABAJO Dimensión de la Unidad 60" de ancho X 44" de profundidad X 114" de alto Peso Total 7509 Esta unidad se instala de la misma manera que todas las chimeneas y hornos para pizza completamente ensamblados.
- Page 5 ¾” clean stone (approx. 3/4 ton) Road Stone Rake Concrete (approx. 42-80 lb bags) Tamper (Hand or Mechanical) Cambridge concrete adhesive approx. 6 (29 oz.) Wheelbarrow or 17 (10.3 oz.) tubes (4 pcs) 2” x 4” x 8’ lumber Level (2’ and 6’ recommended) 2 ½”...
- Page 6 Máscara de polvo Concreto (aprox. 42 bolsas de 80 libras) Guantes Palas (excavacion y plano) Cambridge concretas adhesive aprox. Cortadores de Metal de bandas en los cubos 6 (29 oz) o 17 (10.3 oz.) Tubos Mason Hammer (astillado, martillo) (4 piezas) de 2” x 4” x 8’ Madera Camino del rastrillo de Piedra 2 ½”...
- Page 7 Cambridge Fully Assembled Maytrx Fireplace Pizza Oven Concrete Pad Construction: Call 811 for information on underground utility marking. Select desired location and excavate 64 1/2” L x 48 1/4” D area for concrete pad. Fill excavated area with approximately 4” of ¾” clean gravel, com- pacting every 3”.
-
Page 8: Included In The Kit
Cambridge Fully Assembled Maytrx Fireplace Included In The Kit: Fireplace Top Fireplace Bottom Fork protectors are for installation purposes only, and will need to be removed before the filler blocks are installed. Protectores de horquilla son para instalación sólo se propone y tendrá... - Page 9 Cambridge Fully Assembled Maytrx Fireplace Fully Assembled Outdoor Fireplace : Step 1 4 - FP Blocks to be installed after base is set in place. Step 1: Paso 1: Carefully place the first layer centered Con cuidado, colocar la primera capa centrada on the cured concrete pad according en la plataforma de hormigón curado de...
- Page 10 Cambridge Fully Assembled Maytrx Fireplace FORK PLACEMENT ON THE PALLET Position the forks to pick up the fireplace bottom unit in the spaces that the arrows are pointing to. This fork position is critical to the placement on the first...
- Page 11 Cambridge Fully Assembled Maytrx Fireplace Fully Assembled Outdoor Fireplace: Step 1 Forks Horquilla de Here Transpaleta Aquí Paso 2: Step 2 : Carefully lift the Fireplace Bottom with a capa- Cuidadosamente levantar la parte inferior de horno ble machine and place centered on the first layer.
- Page 12 Cambridge Fully Assembled Maytrx Fireplace Fully Assembled Outdoor Fireplace: Step 3 Place this bullnose filler piece in the back, and front of the fireplace after placing the top of the fireplace on the bottom. Step 3: Paso 3: Lift and carefully place the Fireplace top onto...