Download Print this page

Advertisement

Quick Links

Installation and Operation Instructions
ELECTRIC FIREPLACE
CAM30WMEF

Advertisement

loading

Summary of Contents for CAMBRIDGE CAM30WMEF

  • Page 1 Installation and Operation Instructions ELECTRIC FIREPLACE CAM30WMEF...
  • Page 3 Important Safety Instructions Listing Approvals Product Dimensions Locating Fireplace Unpacking and Testing Fireplace Grounding Instructions 11-12 Installation Finishing Ckecklist Operating Instructions 13-14 Replacing The Rock/Log Set And Light Bulbs Maintenance Troubleshooting...
  • Page 4 1. Prior to plugging your heater into an electrical outlet, verify that the house circuit breakers for the outlet are 2. The heater may emit a slight, harmless odor when first used. This odor is normal and it is caused by the initial heating of internal heater elements and will not occur again.
  • Page 5: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS IMPORT ANT INSTRUCTIONS 'Mlen using this electric fireplace, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: Read all instructions before using this electric fireplace. 2.
  • Page 6 IMPORTANT SAFETY INSTRUCTIONS 11 . Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire or damage the heater. 12. To prevent possible fire, do not block air intakes in any manner.
  • Page 7 X30WMEF 110-120V AC, 60Hz MAX 1400W 30.6 19.2...
  • Page 14 The manual controls are located on the left side of the fireplace. : s l 1. Power ON/OFF: Power to the unit 2. Flame brightness controls: Allows you to adjust the flame to suit your mood.Press increase flame brightness and to decrease flame brightness.You must press the button...
  • Page 15 Replacing The Rock/Log Set And Light Bulbs TO CHANGE LOG/ROCK SET (NOTE: MAKE SURE FIREPLACE IS TURNED OFF AND HAS BEEN UNPLUGGED FROM ELECTRICAL OUTLET BEFORE ATTEMPTING TO CHANGE THE LOG/ROCK SET): 1. Place fireplace on a flat, level surface (FIG 1). 2.
  • Page 17 The remote takes 2 x AAA batteries...