Appliance Door - Bosch VBD554FS0 User Manual And Installation Instructions

en Appliance door
12.2 Attaching the rails
13

Appliance door

With good care and cleaning, your appliance retains its
appearance and remains fully functioning for a long
time to come. This will tell you how to clean the appli-
ance door.
Note: To ensure that the appliance door does not
come into contact with the fitted unit, the appliance
door opens slightly less than 90°.
13.1 Removing the door panels
To facilitate cleaning, you can remove the glass panels
from the appliance door.
WARNING ‒ Risk of injury!
Scratched glass in the appliance door may develop
into a crack.
Do not use any harsh or abrasive cleaners or sharp
▶
metal scrapers to clean the glass on the oven door,
as they may scratch the surface.
Open the appliance door fully.
1.
Use the security pins to lock the left- and right-hand
2.
hinges.
The locking pins must be fully inserted into the
holes in the hinges.
Use both hands to lift the lower section of the inner
3.
panel until the fastening pins come out of the
holder.
Carefully lift the top section of the inner panel until
4.
the fastening pins come out of the holder.
Lift out the inner panel and set it down carefully on a
5.
flat surface.
16
Insert the hooks of the rail into the rear holes in the
1.
side panel.
Push the front hook of the rail into the hole.
2.
Clean the door panels with glass cleaner and a soft
6.
cloth.
13.2 Fitting the door panels
Insert the inner panel.
1.
All four fastening pins must engage in the holders
provided for them.
Remove the locking pins and close the appliance
2.
door.
Note: Do not throw away the locking pins. Store the
locking pins in a secure location. You always require
the locking pins when you remove the door or door
panels from the appliance. If you do not have any lock-
ing pins, you can order these from customer service.
13.3 Detaching the appliance door
If it is particularly dirty, you can remove the appliance
door to clean it more thoroughly.
Open the appliance door fully.
1.
Use the security pins to lock the left- and right-hand
2.
hinges.
The locking pins must be fully inserted into the
holes in the hinges.
Grip the appliance door on either side with both
3.
hands and close it by approx. 30 degrees.
Do not close the appliance door fully. The hinges
could become bent and the enamel could be dam-
aged.
Lift the appliance slightly and pull it out completely.
4.
13.4 Attaching the appliance door
WARNING ‒ Risk of injury!
If the hinges are not secured due to an incomplete
lock, they can snap shut with great force.
If the hinge snaps shut when detaching or attaching
▶
the appliance door, do not reach into the hinge.
Call customer service.
▶
If a door pane or appliance door has not been installed
correctly, this is dangerous.
Make sure that all of the door panes and the appli-
▶
ance door have been correctly fitted before you
switch the appliance back on again.