Maintenance; Troubleshooting - InfiRay Tube SE Series User Manual

InfiRay Outdoor  Tube SE Series  User Manual
⚫ InfiRay Outdoor automatically registers the last connected device.
Therefore, once you have connected with InfiRay Outdoor before, it
will automatically detect the update even when the scope is not
connected to the mobile device.
⚫ If an update is available and the mobile device accesses the
Internet, you can download the update first. Then when the device
is connected with the mobile device, it will be updated automatically.
⚫ After the update is installed, the device will restart automatically.
20 Technical Inspection
Perform a technical inspection to check the following items each time
before you use the device.
⚫ Exterior of the device (no crack on the enclosure).
⚫ Lens and eyepiece (no crack, oil, stain, or other sediments).
⚫ Status of the rechargeable battery (fully charged in advance) and
electrical contact (no salinization or oxidation).
21

Maintenance

The maintenance should be carried out at least twice a year and includes
the following steps:
⚫ Wipe the surface of metal and plastic parts to clear off dust and dirt
by using a cotton cloth. Silicone grease may be used for the cleaning
process.
⚫ Clean the electric contacts and battery slots on the device using a
non-greasy organic solvent.
⚫ Check the glass surface of the eyepiece and lens. If necessary, clear
off the dust and sand on the lens (it is perfect to use a non-contact
method). Use a specialized wiping tool and solvent to clean the
optical surfaces.
22

Troubleshooting

The following table lists all problems that are likely to occur during device
operation. Check and address problems by referring to this table. If faults
not included in this table occur or you cannot fix the fault, return the
www.infirayoutdoor.com
31