Advertisement
Advertisement
Table of Contents
Related Manuals for InfiRay Tube SE Series
Summary of Contents for InfiRay Tube SE Series
- Page 1 InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com...
-
Page 2: Important Safety Information
InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com Important Safety Information - Do not expose your device to extreme temperatures lower than - 20° C and higher than + 50° C. - If the device has been damaged, send the device to our after-sales Environmental influences service for repair. - Page 3 Information on disposal in other countries outside of the Installing/Removing the battery The TUBE SE Series Thermal Imaging Scope is equipped with a built-in European Union a battery pack that cannot be removed. This symbol is only applicable in the European Union. Please contact your local authority or dealer if you wish to dispose of this product and ask for a disposal option.
-
Page 4: Specifications
InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com Specifications Type OLED Resolution 1536×1080 (0.43”) Power Supply Model TL25 SE TL35 SE Battery Built-in 18650 battery/3350mAh Detector Parameters Max. Operating Time Type Uncooled Vox , h* (t=22ºC) Resolution 384 × 288... - Page 5 (such as branches, grass, and shrubs). ⚫ TUBE SE Series Thermal Imaging Scope TUBE SE Series has a built-in power supply solution for a long operation ⚫ Eyeshade duration, and can be widely used for hunting, observation, and ⚫...
-
Page 6: Components And Controls
InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com ⚫ Low power consumption, long battery life 4. Controller ⚫ Standard 25.4mm pipe diameter 5. Power button ⚫ Long detection range 6. Lens focus ring ⚫ 50Hz frame rate 7. Lens cap ⚫... -
Page 7: Button Operation
InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com Button Operation Button Current Status Short Press Long Press Rotate Powered off —— Power on the device —— Home screen Image calibration Power off / Standby the device —— Standby mode Wake up the device ——... - Page 8 InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com menu interface main menu interface Counterclockwise - adjust the Twice: take a photo image brightness Adjust parameters of the Shortcut menu interface function Switch menu options Confirm selection / Enter the...
-
Page 9: Charging The Built-In Battery
Charging the Built-in Battery Safety Precautions ⚫ When charging, please use TUBE SE Series is built in a rechargeable 18650 battery pack, with the 5V2A power adapter battery power for up to 11 hours of normal operating time. The battery compatible with the device. - Page 10 ⚫ When the scope is used for hunting, please carry out the zeroing position on the weapon. operation first according to the instructions as specified in Section ⚫ TUBE SE Series needs to be fixed with an adapter clamp, such as Zeroing in this manual.
- Page 11 InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com ⚫ When using the scope at night or in a dark environment, it is ⚫ Set the image sharpness: On the home screen, short press the recommended to use an eyeshade to avoid being found.
-
Page 12: Status Bar
: Wi-Fi OFF; : Wi-Fi ON) displays the information related to the current operating status of the 10. Clock (Set it in the main menu or in the InfiRay Outdoor App) device. 11. Power status of the built-in battery pack 1. - Page 13 ⚫ After selecting the zeroing distance, rotate the Controller (4) to select the Zeroing function ( ), and press the Controller (4) to TUBE SE Series uses the “freezing” zeroing method. It is better to enter zeroing interface. The perform zeroing in environments within the operating temperature coordinate positions of the range of the scope.
- Page 14 InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com Calibration is frozen. ⚫ Rotate the Controller (4) to move the reticle until the reticle When the image is degraded or uneven, it can be improved by matches the point of impact.
- Page 15 (refers to The TUBE SE Series supports to zoom the image for quickly increase Main Menu - Settings - Date/Time), or synchronize the system date the basic magnification.
- Page 16 InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com ⚫ Photos are stored in the internal memory space. ⚫ The recording icon and prompt box showing the recording time ⚫ When the exclamation mark icon appears on the right side of...
-
Page 17: Laser Rangefinder
InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com Laser Rangefinder memory card. (ILR-1200-1, purchased separately) Memory Access When the device is powered on and connected to a computer, it will be TUBE SE Series supports external laser rangefinder modules (bought recognized by the computer as a flash memory card. - Page 18 InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com ⚫ When the battery icon appears on the right side of the Bluetooth ⚫ In the continuous ranging mode, the ranging is in real time and icon on the status bar, it means the Tube is successfully automatic without any operation.
-
Page 19: Shortcut Menu
InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com Shortcut Menu including black, white, red, and green. - Image Sharpness ( ): Turn the Controller (4) to select the The shortcut menu can be used for quickly changing the basic settings... - Page 20 InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com rotation to move downward and anticlockwise to move upward. button (5) to return to the upper menu without saving the changes. ⚫ Press the Controller (4) to adjust the parameters of the current ⚫...
- Page 21 InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com Turn on / off the Ultra-Clear Mode ⚫ Press and hold the Controller (4) to enter the main menu. Ultra-clear Mode ⚫ Rotate the Controller (4) to select the Ultra-clear mode option.
- Page 22 InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com ⚫ Rotate the Controller (4) to select a mode from the following three: - Automatic: Parameters are defined by software algorithms and images are calibrated automatically in this mode. - Manual: Images are manually calibrated by users according to the image effect.
- Page 23 InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com Turn on/off the Compass and motion sensor function ⚫ Press and hold the Controller (4) to enter the main menu. ⚫ Rotate the Controller (4) to select the Compass and Motion Sensor option.
- Page 24 Please select a zeroing profile and preset a zeroing distance before carrying out any zeroing operation. Zeroing TUBE SE Series supports any zeroing distance between 1 and 999 meters. ⚫ Press and hold the Controller (4) to enter the main menu. ⚫ Rotate the Controller (4) to select Zeroing option.
- Page 25 InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com ⚫ Press the Controller (4) briefly to enter the submenu of Zeroing, where zeroing distances are displayed. ⚫ There are three types of distance for selection - 100m, 200m and 300m by default.
- Page 26 The laser rangefinder module (purchased separately) needs to be calibrated before first installation and using, which help to Laser Calibration make the target position pointed by the laser indicator to align with the center of the rangefinder cursor on the screen. ⚫ Install the laser rangefinder module on Tube SE Series.
- Page 27 ⚫ Press and hold the Power button on the rangefinder module for 3s to power on the rangefinder module. ⚫ Turn on the Bluetooth of the TUBE SE Series in the main menu and wait for to connect the rangefinder module successfully until the battery icon appears on the right side of the Bluetooth icon on the status bar.
- Page 28 InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com and exit the laser calibration interface. Set Standby Status and Time ⚫ Press and hold the Controller (4) to enter the main menu. ⚫ Rotate the Controller (4) to select the Standby option.
- Page 29 InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com ⚫ A small cross cursor appears in the center of the screen instead of the reticle and the PIP function is automatically enabled, which is displayed in the lower left corner of the screen by default.
- Page 30 InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com ⚫ After correction, press and hold the Controller (4) until a prompt "Do you want to keep these settings?" is displayed. ⚫ Rotate the Controller (4) to select ‘Yes’ to save and exit, or select ‘No’ to cancel saving and exit.
- Page 31 InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com System Date Setting ⚫ Rotate the Controller (4) to select the Date option. ⚫ The date is displayed in the format of YYYY/MM/DD. ⚫ Press the Controller (4) briefly to activate the date reset Date function.
- Page 32 InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com ⚫ After setting, press and hold the Controller (4) to save the selected time and exit from the time reset function. ⚫ When the time is reset, the icon on the status bar will be updated accordingly.
- Page 33 InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com Turn on / off the Status Auto Hiding function ⚫ Rotate the Controller (4) to select the Status Auto Hiding option. ⚫ Press the Controller (4) briefly to enter the Status Auto Hiding submenu.
- Page 34 InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com - Image Mode: White hot - Compass and Motion Sensor: Off - Zeroing Distance: A100 - Bluetooth: Off - PIP: Off - Standby: Off - Ultra-Clear Mode: Off - Language: English...
- Page 35 ⚫ The GUI icons will be displayed with the press of any button. The Wi-Fi name and password of the device can be reset on the InfiRay ⚫ Only after the GUI icons is displayed, the buttons and menus can...
- Page 36 Settings The latest programs can be automatically detected and updated via the interface. InfiRay Outdoor App. Also, it is feasible to download and update from the ⚫ In the text box, enter and submit the official website: www.infirayoutdoor.com.
-
Page 37: Maintenance
InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com Maintenance ⚫ InfiRay Outdoor automatically registers the last connected device. Therefore, once you have connected with InfiRay Outdoor before, it will automatically detect the update even when the scope is not The maintenance should be carried out at least twice a year and includes connected to the mobile device. - Page 38 InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com device to its vendor or supplier for troubleshooting. Fault Possible Causes Solution The scope cannot be started. The battery is out of charge. Charge The USB cable is damaged. Replace the USB cable.
- Page 39 InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com Check the outer surface of the objective lens and eyepiece, and if necessary, wipe off any dust and frost on it. In cold weather, a special antifogging coating can be applied (such as those used on eyeglasses or car rearview mirrors).
-
Page 40: Legal And Regulatory Information
InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com because of reduced temperature contrast. Therefore, the image quality (details in particular) is poor, which is a characteristic of thermal imaging devices. Labeling requirements Legal and Regulatory Information This device complies with part 15 of the FCC Rules. Operation is subject... - Page 41 InfiRay Outdoor Tube SE Series User Manual www.infirayoutdoor.com These limits are designed to provide reasonable protection against This device was tested for typical body-support operations. To comply harmful interference in a residential installation. This equipment with RF exposure requirements, a minimum separation distance of generates uses and can radiate radio frequency energy and, if not 0.5cm must be maintained between the user's body and the handset,...