Subscribe to Our Youtube Channel
Related Manuals for arcelik 8100 MT
Summary of Contents for arcelik 8100 MT
- Page 1 Washing Machine User Manual 8100 MT Document Number: 2820530144_EN/ 06-04-22.(14:57)
-
Page 2: General Safety Instructions
1 General safety instructions • Do not force open the locked loading door. The door will This section includes security open immediately after the instructions which may help prevent washing cycle has ended. If the the injuries and material damage risks. door does not open, apply the All kinds of warranties shall be invalid if solutions provided for “Loading... -
Page 3: Children's Safety
1.3 Children’s safety CAUTION! • Do not forget to close the CAUTION! loading door when leaving the • This product can be used room where the product is by children at and above 8 located. years old and by persons •... -
Page 4: Important Instructions For Environment
This product has been manufactured with high DANGER quality parts and materials which can be reused and are suitable for recycling. Do not dispose • Do not wash the product by of the waste product with normal domestic spraying or pouring water onto and other wastes at the end of its service life. -
Page 5: Technical Specifications
4 Technical specifications Supplier name or trademark Arçelik 8100 MT Model name 7144950100 Rated capacity (kg) Maximum spin speed (rpm) 1000 Built-in Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet • / - • Available... -
Page 6: Appropriate Installation Location
4.1 Installation • Leaving a gap at the sides of the machine is suggested to reduce vibration and noise INFORMATION • On a graduated floor, do not place the product next to the edge or on a platform. • Your washing machine automatically •... -
Page 7: Connecting Water Supply
4.1.4 Connecting water supply INFORMATION • It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure reducing valve if water pressure is higher. CAUTION! •... -
Page 8: Adjusting The Feet
4.1.6 Adjusting the feet 4.1.8 Initial use Before starting to CAUTION! use the product • In order to ensure that the product make sure that operates more silently and vibration- the preparations free, it must stand level and balanced are made which on its feet. - Page 9 4.2 Preparation 4.2.3 Tips for energy and water saving Following information will help you use the 4.2.1 Sorting the laundry product in an ecological and energy/water- • Sort laundry according to type of fabric, efficient manner. colour, and degree of soiling and allowable •...
-
Page 10: Using Detergent And Softener
4.2.6 Using detergent and softener • When washing dark coloured clothes and quilts, it is recommended to use liquid detergent. INFORMATION • Wash woollens at suggested programme • When using detergent, softener, starch, with special detergent made specifically for fabric dye, bleach and descaling agents; woollens read the manufacturer’s instructions written •... - Page 11 Using liquid detergents • If the gel detergent thickness is not fluidal or in the shape of capsule liquid tablet, put it If the product contains a liquid detergent cup: directly into the drum before washing. • Put the liquid detergent container into the •...
-
Page 12: Tips For Efficient Washing
4.2.7 Tips for efficient washing Clothes Light Colours and Black/Dark Delicates/ Colours Whites Colours Woollens/Silks (Recommended (Recommended (Recommended temperature (Recommended temperature temperature range temperature range range based on soiling level: range based on soiling level: based on soiling based on soiling 40-90 oC) cold-40 oC) level: cold -40 oC) -
Page 13: Operating The Product
4.3 Operating the product 1 - Programme Selection Knob (Uppermost position On / Off) 4.3.1 Control panel 2 - Display 3 - End Time Adjustment Button 4 - Programme Follow-up Indicator 5 - Start/Pause Button 6 - Auxiliary Function Button 3 7 - Auxiliary Function Button 2 8 - Auxiliary Function Button 1 9 - Spin Speed Adjustment Button... - Page 14 • : Selectable * : Automatically selected, cannot be cancelled. ***: Eco 40-60 with 40 °C temperature selection is the test programme in accordance with EN 60456:2016/A11:2020 and energy label with Commission Delegated Regulation (EU) 2019/2014 - : See the programme description for maximum load. INFORMATION •...
-
Page 15: Main Programmes
4.3.5 Main programmes Depending on the type of fabric, use the Hijyen+ ( Hygiene+) • following main programmes. Applying a steam step at the beginning of the • Pamuklu (Cotton) programme allows to soften the dirt easily. You can wash your durable cotton laundry Use this programme for your laundry (baby (sheets, bedlinen, towels, bathrobes, underwear clothes, bed sheets, bedlinen, underwear, etc. -
Page 16: Special Programmes
Karma (Mix) • When the quick function is selected: You can use this programme to wash cottons and Blood Fruit juice synthetics together without the need to sort them. Chocolate Ketchup Pudding Red Wine Curry Gömlek (Shirts) • Use this programme to wash shirts made of Coffee Coal cotton, synthetic and synthetic blended fabrics... - Page 17 4.3.10 Auxiliary function selection INFORMATION Select the desired auxiliary functions before starting the programme. You can also select • Use a lower spin speed for delicate laundries. or cancel auxiliary functions suitable for the 4.3.8 Temperature selection running programme without pressing the Start/ Pause button while the machine is operating.
-
Page 18: Functions/Programmes Selected By Pressing The Function Buttons For 3 Seconds
• İlave Su (Extra Water) INFORMATION This function allows you to wash your laundry with plenty of water, and rinse it in all the • If the Programme Selection knob is turned programmes indicated as selectable in the when the Child Lock is enabled, "Con" Programme and consumption table. - Page 19 Cancelling the delayed end function the function by turning the programme selection knob, the programme follow-up light will remain on If you want to cancel the delayed end time or go off depending on the selected programme. countdown and start the programme immediately: If you do not cancel the function by pressing the 1.
-
Page 20: Loading Door Lock
INFORMATION • If the machine does not proceed to the spinning step, the Rinse Hold function might be active or the automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the machine. 4.3.14 Loading door lock There is a locking system on the loading door of the machine that prevents opening of the loading... -
Page 21: Cancelling The Programme
4.3.18 Your machine has the Adding and removing laundry "Pause Mode" function. 1. Press the “Start/Pause” button to pause the After using the On/Off button to switch on the machine. The programme follow-up light of machine, if you do not start any programme in the relevant step during which the machine the selection step or do not perform anything was switched into the pause mode will flash. -
Page 22: Maintenance And Cleaning
4.4 Maintenance and cleaning INFORMATION Service life of product extends and frequently • Foreign metal substances will cause experienced problems will be reduced if it is rust stains in the drum. Clean the cleaned at regular intervals. stains on the drum surface by using 4.4.1 Cleaning the detergent drawer cleaning agents for stainless steel. -
Page 23: Draining Remaining Water And Cleaning The Pump Filter
4.4.5 Draining remaining water The product does not have an emergency water drain hose, in order to drain the water: and cleaning the pump filter The filter system in your machine prevents solid items such as buttons, coins and fabric fibres clogging the pump impeller during discharge of washing water. -
Page 24: Troubleshooting
5 Troubleshooting Programmes do not start after the loading door is closed. Loading door cannot be opened. • Start / Pause / Cancel button is not pressed. >>>Press • Loading door lock is activated because of the water level in Start / Pause / Cancel button. - Page 25 Product does not switch to spinning step. (*) Colour of the clothes faded. (**) • There is unbalanced load in the product. >>>Automatic • Excessive laundry was loaded in. >>>Do not load the unbalanced load detection system is activated due to the product in excess.
- Page 26 • The detergent in the main wash compartment got wet while taking in the prewash water. Holes of the detergent compartment are blocked. >>>Check the holes and clean if they are clogged. • There is a problem with the detergent drawer valves. >>>Call the Authorised Service Agent.
- Page 27 Moreover, to ensure product safety and to prevent risk of serious injury, the mentioned self-repair shall be done following the instructions in the user manual for self-repair or which are available in https://www.arcelik.com.tr/destek. For your safety, unplug the product before attempting any self-repair.
Need help?
Do you have a question about the 8100 MT and is the answer not in the manual?
Questions and answers