Hilti DX 351 M&E Manual page 26

▶ Store unused cartridges in accordance with the storage specifications for cartridges for powder-actuated
fastening tools (e.g. dry, temperature between 5 °C and 25 °C) in a locked storage facility.
▶ Do not leave unused or partly used cartridge strips lying around. Collect the used cartridge strips and
store the cartridge strips at a suitable location.
▶ Follow all instructions relating to safety, handling and storage in the safety data sheet of the cartridges.
3 Description
3.1 Product overview
3.2 Overview: Fastener guide
Exit aperture for fasteners (muzzle)
@
Union nut
;
Piston brake
=
3.3 Intended use
The product described is a cartridge-actuated fastening tool for driving fasteners and composite fasteners
into concrete, steel and sand-lime block.
Use the product only in combination with the equipment designed for use with the fastening tool. Fastener
guides, pistons and fasteners must be compatible with one another.
Use the product only with spare parts and accessories from Hilti and with cartridges and fasteners from
Hilti, or other suitable cartridges and fasteners.
3.4 Requirements to be met by cartridges
WARNING
Risk of injury by unexpected explosion!
requirements can lead to a build-up of unburned powder. A sudden explosion and severe injuries to the
operator and bystanders can result.
▶ Use only cartridges that meet the minimum safety requirements of your local statutory regulations!
▶ Adhere to the maintenance intervals as stated and have the fastening tool cleaned regularly by Hilti-
Service!
Use only the Hilti DX cartridges listed in this table, or other suitable cartridges that are compliant with the
minimum safety requirements:
20 English
1
2
Use of cartridges that do not meet the minimum safety
Piston
@
Piston guide
;
Power-tool housing
=
Hand rest
%
Latching pawl
&
Locking sleeve
(
Cartridge barrel (ejection)
)
Cartridge barrel (insertion)
+
Adjusting knob for driving energy
§
Indicator for driving energy
/
(Model versions BT/BTG black)
Air vents
:
Main grip
∙
Trigger
$
Nail detection
%
Drawer
&
Magazine
(
332581
*332581*