Related Manuals for decon INFM7002
Summary of Contents for decon INFM7002
- Page 1 Assembly Instructions INFM7002, INFM7102, INFM7202 Infinity Mounting set Panthera S3/U3/U3 Light/U3 Light L 2023-01 Revision 2...
-
Page 2: General Instructions
Particularly important or explanatory information General instructions These instructions shall always be followed when placing the mounting set INFM7002, INFM7102, INFM7202 Mounting set Panthera S3/U3 on a wheelchair. To be able to connect Infinity to the wheelchair Infinity also needs to be adjusted according to the assembly instructions that is included in the delivery of Infinity. - Page 3 Mounting set INFM7002, INFM7102, INFM7202 __________________________________________________________________________________ 2. Overview A Center pipe adapter bar B Outer pipe adapter bar C Clamp adapter bar D Preassembled adapter plate E QR-Pin F Universal clamp G Panthera clamp __________________________________________________________________________________ Page 3/8...
- Page 4 Mounting set INFM7002, INFM7102, INFM7202 __________________________________________________________________________________ 3. Assembly and adjustment of adaptor First mount preassembled adapter plate (D), universal clamp (F), wedge (I), sleeve (J), screw (K) and washer (L) onto the wheelchair. Tighten loosely so that the parts can move along the frame.
- Page 5 Mounting set INFM7002, INFM7102, INFM7202 __________________________________________________________________________________ Now mount the complete adapter bar that consists of center pipe (A), outer pipe (B) and clamp (C). The complete adapter bar is mounted into the holders (D) by using the QR-pins (E). Make sure the ends of the...
- Page 6 Mounting set INFM7002, INFM7102, INFM7202 __________________________________________________________________________________ Now use the leveling tool that is included in the delivery of Infinity. Since the adapter bar have splines inside it will not be possible to get the bubble of the spirit level exactly right. Just choose the most correct position.
- Page 7 Mounting set INFM7002, INFM7102, INFM7202 __________________________________________________________________________________ Alt.2 Using the adjustment tool that is included in the delivery of Infinity (not this mounting set), set the angle of the adaptorbar. Only mount the inner pipe on one side and then rotate the center pipe to the correct angle.
- Page 8 Decon Wheel AB Södra Ekeryd 119, SE-314 93 Hyltebruk, Sweden Tel: +46 (0)345 40880 Fax: +46 (0)345 40895 E-mail: info@decon.se...