Advertisement
Mounting set
INFM7002, INFM7102, INFM7202
__________________________________________________________________________________
3. Assembly and adjustment of adaptor
First mount preassembled adapter plate (D),
F
universal clamp (F), wedge (I), sleeve (J), screw
(K) and washer (L) onto the wheelchair. Tighten
loosely so that the parts can move along the
frame.
Mount the Panthera clamp (G) around the frame
using screw (K), washer (L) and locking nut (M)
and tighten loosely.
K L
I
J
Check that the preassembled adapter plate sits
correctly and then tighten the screws
Assemble both sides.
M
L
WARNING!
The screws (K) in universal clamp (F) and
Panthera clamp (G) must be tightened to 10-
15Nm.
L
Loctite 243 or eq. shall be applied to the screws
K
in the universal clamp (F)
__________________________________________________________________________________
Page 4/8
Advertisement
