Contents Contents 1 Safety Precautions ..........................5 Gas heated tumble dryer ......................7 General information ........................7 Commercial use only........................7 Ergonomics certification ......................8 Symbols............................8 2 Warranty terms and exclusions......................9 3 Operating panel ..........................10 4 Program description .......................... 11 Lagoon programs........................11 General programs........................12 5 Handling ............................13 Load ............................13 How to start the machine ......................14...
User manual 1 Safety Precautions • Servicing shall be carried out only by authorized personnel. • Only authorized spare parts, accessories and consumables shall be used. • The machine is not to be used if industrial chemicals have been used for cleaning. •...
Page 6
User manual • Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire.
User manual 1.1 Gas heated tumble dryer • Before installation, check that the local distribution conditions, nature of gas and pres- sure and the adjustment of the appliance are compatible. • The machine is not to be installed in rooms containing cleaning machines with per- chloroethylene, TRICHLOROETHYLENE or CHLOROFLUOROCONTAINING HY- DROCARBONS as cleaning agents.
User manual 1.4 Ergonomics certification The human body is designed for movement and activity but physical stress injuries as a result of static and repetitive movements or unfavorable working postures may occur. The ergonomic features of your product, the ones which may influence your physical and cognitive interaction with it, have been assessed and certified.
Warranty will be applicable where the customer has used only genuine spare parts and has performed maintenance in accordance with Electrolux Professional user and maintenance documentation made available in paper or elec- tronic format. Electrolux Professional strongly recommends using Electrolux Professional approved cleaning, rinse and descaling agents to obtain optimal results and maintain product efficiency over time.
User manual 4 Program description There are two types of programs, automatic programs and time programs. Automatic programs has moisture detection and will stop when selected dryness is achieved. Time programs has no moisture detection and will stop when the preset or selected time has ended. 4.1 Lagoon programs The following table shows some examples of available programs and a short description of those: Automatic programs...
User manual 4.2 General programs The following table shows some examples of available programs and a short description of those: Automatic programs Description COTTON Denim and terry. EXTRA DRY The program will stop when set dryness is achieved. COTTON Cotton and terry. CARE The program will stop when set dryness is achieved.
User manual 5 Handling 5.1 Load Note! Remove all objects from pockets and make sure there are no metal objects such as screws, pins etc. left. Metal objects might cause damage to the drum. Make sure the filter is clean. fig.X01072A...
User manual Load the goods into the machine and close the door. The recommended maximum load is 7.5 kg. 5.2 How to start the machine Automatic programs Select program with the control knob. Start the machine by pressing the control knob. Time programs Select program with the control knob.
User manual End a program It is possible to end a program after start. Select END PROGRAM and activate. When pressing the control knob the program will be ended. Status Select STATUS MENU and activate. The status menu shows the status for inlet air temp, outlet air temp, RMC and if the heat is on or off in the machine. Change drum speed (only on machines with MCU) Select CHANGE DRUM SPEED and activate.
User manual 6 Error codes A fault in the program or in the machine is indicated by an error code on the display. Some of these error codes can be solved easily without contacting service personnel. Error Text Cause/Action code 12:11 DRYING ERROR WITH RMC The RMC system (Residual moisture system) in the machine indicates that the garment is not...
User manual 7.3 Every day Check that the machine does not operate with the door or the filter drawer open, if so, the machine must be placed out of order until repairs are made. Note! Contact qualified service personnel to disconnect power from the affected machine. Clean the door, door glass, door gasket and other external parts.
User manual 7.4 Machines with heat pump 7.4.1 Second lint filter There are two warning messages indicating that the second filter shall be cleaned: 1. “CLEAN FIRST AND SECOND FILTER.” 2. “CLEAN FIRST AND SECOND FILTER. IF NOTICE REMAINS, CONTACT RESPONSIBLE FOR CHANGING THE SPECIAL FILTER.”...
User manual 8 Disposal information 8.1 Disposal of appliance at end of life Before disposing of the machine, make sure to carefully check its physical condition, and in particular any parts of the structure that can give or break during scrapping. The machine’s parts must be disposed of in a differentiated way, according to their different characteristics (e.g.
Page 20
Electrolux Professional AB 341 80 Ljungby, Sweden www.electroluxprofessional.com...
Need help?
Do you have a question about the Lagoon TD6-7LAC and is the answer not in the manual?
Questions and answers