Berker 9450 01 00 Operation And Assembly Instructions

radio bus
Radio switch actuator RMD
Radio switch actuator RMD
Order-No. : 9450 01 00
Operation- and
Assembly Instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Danger of electric shock. Always disconnect before carrying out work on the devise or
load. At the same time, take into account all circuit breakers that supply dangerous
voltage to the device or load.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
The radio communication takes place via a non-exclusively available transmission path,
and is therefore not suitable for safety-related applications, such as emergency stop and
emergency call.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
(1) Switch actuator
(2) Programming button
(3) LED
(4) Connection terminal for bus cable
3 Function
Intended use
- Radio-controlled switching of incandescent lamps, fluorescent lamps, HV halogen lamps
and Tronic or inductive transformers with halogen lamps
- Operation with suitable radio transmitters in combination with RMD radio receivers or via
extension units
82549911
97-09567-000
Figure 1
Seite 1/4
17.12.2010