Advertisement
Quick Links
radio bus
Radio universal dim actuator RMD
Radio universal dim actuator RMD
Order-No. : 9455 01 00
Operation- and
Assembly Instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Danger of electric shock. Always disconnect before carrying out work on the devise or
load. At the same time, take into account all circuit breakers that supply dangerous
voltage to the device or load.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
The load is not electrically isolated from the mains even when the device is switched off.
Fire hazard. For operation with inductive transformers, each transformer must be fused
on the primary side in accordance with the manufacturer's instructions. Only safety
transformers according to EN 61558-2-6 may be used.
Do not connect any electronic lamps, e.g. switchable or dimmable compact fluorescent
lamps or LED lamps. Device can be damaged.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
(1) Dimmer
(2) Programming button
(3) LED
(4) Connection terminal for bus cable
82550121
97-09569-000
Figure 1
Seite 1/7
17.12.2010
Advertisement
Related Manuals for Berker RMD
Summary of Contents for Berker RMD
- Page 1 Radio universal dim actuator RMD Radio universal dim actuator RMD Order-No. : 9455 01 00 Operation- and Assembly Instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Failure to observe the instructions may cause damage to the device and result in fire and other hazards.
-
Page 2: Operation
Radio-controlled switching and dimming of incandescent lamps, HV halogen lamps and Tronic or dimmable inductive transformers with halogen lamps. Operation with suitable radio transmitters in combination with a radio receiver RMD Suitable for mixed operation up to the specified output (Technical data) - Page 3 Before carrying out work on the device or load, disengage all the corresponding circuit breakers. Cover up live parts in the working environment. Connecting and mounting the dimmer Figure 2: Connecting the dimmer (1) to RMD radio receiver (5) 82550121 Seite 3/7 17.12.2010...
- Page 4 (Figure 3) or (Figure 4). i Lit installation buttons may only be connected if they have a separate N terminal. Connect dimmer to terminal (4) via a bus cable with the RMD radio receiver (5) and/or other radio actuators (Figure 2).
- Page 5 Radio universal dim actuator RMD 5.2 Commissioning i Observe the instructions for the radio transmitter. DANGER! Electrical shock when live parts are touched. Electrical shocks can be fatal. Before working on the device, cover up live parts in the working environment.
-
Page 6: Troubleshooting
Radio universal dim actuator RMD 6 Appendix 6.1 Technical data Rated voltage AC 230 V ~ Mains frequency 50 / 60 Hz Ambient temperature 0 ... +45 °C Storage/transport temperature -25 ... +70 °C Connected load at 35 °C i Power specifications including transformer power dissipation. -
Page 7: Warranty
Radio universal dim actuator RMD Using a radio repeater. 6.3 Accessories Radio receiver RMD Order-No. 9405 01 00 6.4 Warranty We reserve the right to make technical and formal changes to the product in the interest of technical progress.
Need help?
Do you have a question about the RMD and is the answer not in the manual?
Questions and answers