Table of Contents
Advertisement
All manuals and user guides at all-guides.com
5.3.5 Wireless (For EQN2201 only)
Wireless Setting
En
able Wireless (Default: disable)
SS
ID:
Name o
f the wireless network the camera is configured for. The field accepts up
to 32 alphanumeric characters. The name must be exactly the same as the one used
in the wireless access point or the connection will not be established.
Network Type: Infrastructure or Ad-Hoc (Default: Infrastructure)
-"Infrastructure" makes the Network Camera connect to the WLAN via an Access
Point.
-"Ad-Hoc" makes the Network Camera connect directly to a host equipped with a
wireless adapter in a peer-to-peer environment.
Channel: Shows the wireless channel currently in use. (Default: 1)
Disable Security: Check the box to disable Security
When selecting WEP:
WEP (Wired Equivalent Protection) key should follow either one of the following rules:
- As 5 characters for 64-bit WEP and 13 characters for 128-bit WEP.
- As 10 hexadecimal (0-9, A-F) characters for 64-bit WEP and 26 hexadecimal (0-9,
22
EQN2200/2201
Advertisement
Table of Contents
