Page 2
Precautions Do not install the camera near electric or magnetic fields. Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the electromagnetic fields generated from these devices may distort the video image or otherwise interfere with camera operation. Never disassemble the camera beyond the recommendations in this manual nor introduce materials other than those recommended herein.
Page 3
Safety Notice Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
To take full advantage of the amazing resolution available from this advanced imaging technology, the EverFocus eZ.HD Series ECD900 uses a 3.6mm lens together with 1/2.8" SONY 1.37M pixels CMOS to deliver 720p high resolution. Combined with a useable native low light sensitivity of 0.08lux without using digital slow shutter, this camera truly provides HD...
ECD900 eZ.HD Mini Dome Camera 2. Cable Description Name Descriptions Power Cable Connect to a 12VDC. Dual Video Output 720p and 960H output, using a 75 Ohm BNC-type coaxial cable. Optional power pigtail cable. The red wire is positive (+); DC Power Pigtail Cable while the black wire is negative (-).
ECD900 eZ.HD Mini Dome Camera 3. Installation 3.1 Installation and Adjustment Stick the Template Plate on the position where you want to attach the camera. Drill the three holes on the template for screwing the camera with the supplied screws and anchors, and the circle in the middle only if you want to wire the cables through the wall / ceiling.
Page 8
ECD900 eZ.HD Mini Dome Camera Connect the camera to the 12VDC power source and an AHD DVR or monitor. Configure the OSD Menu, using the function button. Note: The function button is not only for direction control, but also for switching Video format and Video output.
ECD900 eZ.HD Mini Dome Camera 4. Configuration in the OSD Menu You can use the function buttons on the rear panel of the camera body to configure camera settings in the OSD menu: Main Sub Menu Sub Menu / Function Lens Manual* NTSC: 1/30, 1/60, FLK, 1/240, 1/480, 1/1000, 1/2000, 1/5000, 1/10000,...
Page 10
ECD900 eZ.HD Mini Dome Camera Outdoor Blue 1-500(50*) Manual 0-100(50*) D→N(Delay) 0-60(1*) N→D(Delay) 0-60(1*) D→N(AGC) 1-255(240*) D→N(Delay) 0-60(1*) Auto* 1-255(50*) N→D(AGC) 0-60(5*) N→D(Delay) Day & Color Night Burst Off*/On Off* Level 0-15(4*) IR Smart Position, Size,↑,↓, Area →,← IR PWM 0-100(100*) 2DNR Middle*/Low/Off/High...
Page 11
ECD900 eZ.HD Mini Dome Camera Alarm Out On*/Off Alarm Sig High*, Low Time 1-15(3*) Default Select Area1*,Area2,Area3,Area4 Position, Size,↑,↓, Color* →,← Display Position, Size,↑,↓, Mosaic →,← Privacy Position, Size,↑,↓, →,← White*, Black, Red, Blue, CYAN, Color Yellow, Green 1.00*,0.75,0.50, Trans 0.25 Default Language...
Page 12
ECD900 eZ.HD Mini Dome Camera CAM ID 0-255(1*) RS485 ID Display Off*/On Baud Rate 2400,4800,9600,19200 ,38400 Level 0-10(6*) Sharpness Auto* Start AGC 0-255(50*) End AGC 0-255(200*) Black Level 0-60(0*) Blue Gain 0-100(50*) Red Gain 0-255(50*) Adjust User*,0.45,0.50,0.55,0.60,0.65,0.70, CRT/LCD Gamma 0.75,0.80,0.85,0.90, 0.95,1.00 LCD* Blue Gain...
ECD900 eZ.HD Mini Dome Camera 5. Specifications ECD900 Pickup Device 1/2.8" SONY 1.37M pixels CMOS Video Format NTSC and PAL( can be switched via OSD) Effective Pixels 1280 (H)*720 (V) Scanning System Progressive Scan Sensitivity 0.08 lux. S/N Ratio Over 48 dB (AGC OFF) Electronic Shutter AUTO, Manual (X30~1/ 50000), FLK Video Output...
Page 14
TEL: +91 22 6726 4500 FAX: +91 22 6726 4518 www.everfocus.in sales@everfocus.in Ihr EverFocus Produkt wurde Your EverFocus product is designed and entwickelt und hergestellt mit manufactured with high quality materials qualitativ hochwertigen Materialien and components which can be recycled und Komponenten, die recycelt und and reused.
Need help?
Do you have a question about the ECD900B and is the answer not in the manual?
Questions and answers