Mounting On A Table - LG D2500N Owner's Manual

Mounting on a table
1
Lift and tilt the Monitor into its upright position
on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
10 cm
2
Connect the Power Cord to a wall outlet.
3
Press (Power) button on the front switch
panel to turn the power on.
CAUTION
Unplug the power cord before moving the
y y
Monitor to another location. Otherwise
electric shock may occur.
Using the Kensington security system
The Kensington security system connector is
located at the back of the Monitor. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit http://www.kensington.com .
Connect the Kensington security system cable
between the Monitor and a table.
10 cm
10 cm
The Kensington security system is optional.
y y
You can obtain it from most electronics
stores.
ASSEMBLING AND PREPARING
NOTE
9