Mounting On A Wall - LG D2500N Owner's Manual

10
ASSEMBLING AND PREPARING
Mounting on a wall
For proper ventilation, allow a clearance of 10 cm
on each side and from the wall. Detailed
instructions are available from your dealer, see the
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
10 cm
If you intend to mount the Monitor to a wall, attach
the Wall mounting interface (optional parts) to the
back.
When you install the Monitor using a wall mounting
interface (optional parts), attach it carefully so it
will not drop.
1
Please, Use screws and a mount interface in
accordance with VESA Standards.
2
If you use screws longer than standard, the
monitor might be damaged internally.
3
If you use improper screws, the product might be
damaged and drop from mounted position. In
this case, LG Electronics is not responsible for
damage.
4
VESA compatible only with respect to screw
mounting interface dimensions and mounting
screw specifications.
10 cm
10 cm
10 cm
5
Please use VESA standard as below.
784.8 mm (30.9 inch) and under
y y
* Wall Mount Pad Thickness : 2.6 mm
* Screw : Φ 4.0 mm x Pitch 0.7 mm x
Length 10 mm
787.4 mm (31.0 inch) and above
y y
* Please use VESA standard wall mount pad
and screws.
Model
VESA (A x B)
Standard screw
Number of screws
Wall mount bracket
(optional)
VESA (A x B)
y y
A
B
D2500N
200 x 100
M4
4
RW240