Swivel Stand; Detaching The Stand Base; Detaching The Stand Body - LG D2500N Owner's Manual

8
ASSEMBLING AND PREPARING
Swivel stand
1
Swivel 45 degrees and adjust the angle of the
Monitor to suit your view.
Detaching the stand base
1
Place the monitor's screen face down.
To protect the screen from scratches, cover the
surface with a soft cloth.
2
Turn the screw in the stand base
counterclockwise. Detach the stand base from
the stand body.
Stand Body
Stand Base
CAUTION
The components appearing in the illustrations
y y
may look different from the actual product.
Do not carry the monitor upside-down as this
y y
may cause it to fall off its stand, resulting in
damage or injury.
To avoid damaging the screen when lifting
y y
or moving the monitor, only hold the stand
or the plastic cover. This avoids putting
unnecessary pressure on the screen.
Only remove the tape and the locking pin
y y
when the monitor is mounted on the stand
base and is in an upright position. Otherwise,
the stand body may protrude, which may
lead to injury.
Detaching the stand body
1
Place the monitor's screen face down. To
protect the screen from scratches, cover the
surface with a soft cloth.
2
Using a screwdriver, remove the four screws
and detach the stand from the monitor.