Table of Contents
Advertisement
6
ASSEMBLING AND PREPARING
Mounting on a table
1
Lift the monitor and place it on the table in an
upright position.
Install at least 10 cm away from the wall to
ensure sufficient ventilation.
10 cm
10 cm
2
Connect the Power cord to the monitor, then
plug the power cord into the wall outlet.
3
Press the (Power) button on the front of the
monitor to turn on the monitor.
CAUTION
Unplug the power cord prior to moving or
y
y
installing the monitor. There is risk of electric
shock.
Adjusting the angle
1
Place the monitor mounted on the stand base
2
Adjust the angle of the screen. The angle of
10 cm
10 cm
y
y
y
y
in an upright position.
the screen can be adjusted up to 5° forwards
and 20° backwards for a comfortable viewing
experience.
Rear Side
WARNING
To avoid injury to the fingers when adjusting
the screen, do not hold the lower part of the
monitor's frame as illustrated below.
Be careful not to touch or press the screen
area when adjusting the angle of the monitor.
Front Side
Advertisement
Table of Contents
