Section 6.5 | Configuration Via Web User Interface - SMC Networks SMCWMR-AG User Manual

c) "Is proxy present?" – Select [No] and press [OK] on your remote to
continue. (Note: The majority of home networks use a standard
Broadband Router to share internet access. In this configuration, there
is no proxy present.) Some corporate networks may have proxies in
place for advanced security. To configure this setting, simply obtain
the proxy IP address and port from your Network Administrator and
then input this data via your remote control.
d) You have now completed the initial configuration. You will be asked to
confirm the changes by pressing [OK] to continue. The SMCWMR-AG
will reset and automatically connect to your network upon boot-up.
e) Once the SMCWMR-AG is connected, it will ask you to [Register Now].
This will give you the option to upgrade your firmware via Smart Box
Management to take advantage of new updates. (Note: You can
register at any point by going to the [Settings] menu)

Section 6.5 | Configuration via Web User Interface

In addition to the TV User Interface, there is also a Web User Interface made
available for quick and easy configuration from a networked PC.
Step 1: Verify the IP Address of the SMCWMR-AG.
a) If you have a DHCP server on your network, such as a broadband
router, you can log into your router and view the DHCP Client Log.
This will show what IP Address the router has given the SMCWMR-AG.
Record this IP address.
b) You can also go to the "General" tab of your Media Server software
and click the [Search for MediaLink] button. Then the complete URL of
the Web User Interface will be displayed.
Step 2: If your SMCWMR-AG is connected to the network using the default
settings, the URL will be "http://192.168.2.45/conf.shtml". Open your web
browser and type the URL in the Address bar.
(Note: If you set your SMCWMR-AG to obtain an IP Address automatically, then
type "http://IP_Address/conf.shtml" in the web browser in order to access the
web user interface. If you do not know the IP Address, use the [Search for