Error Code - InMotion RS User Manual

ERROR CODE

Front/Rear Drive Controller Malfunction
Code meaning
101/201 Current sampling failure of drive controller
102/202 Hall fault of drive motor
109/209 Instrument did not receive data from the drive controller
110/210 Drive controller did not receive data from the instrument
111/211 MOS over-temperature of drive controller
112/212 Overheating of drive motor
114/214 Overheating of drive MCU
117/217 Overcurrent fault of drive controller
118/218 Stuck fault of drive controller
Notice:
• The first digit of a three-digit error code represents the faulty part, with 1 representing the front wheel and 2 representing the rear wheel
Explanation
Controller malfunction, please reboot or contact after-sales service for replacement.
Motor malfunction, please contact after-sales service for replacement.
Communication failure, the instrument did not receive the controller data.
Communication failure, the controller did not receive data from the instrument.
The temperature of the controller board is too high, please stop riding and wait for
tcool down.
The motor temperature is too high, please stop riding and wait for the temperature to
decrease.
The MCU temperature is too high, please stop riding and wait for the temperature to
decrease.
Controller malfunction, please reboot or contact after-sales service for replacement.
Motor stuck, please remove obstacles or contact after-sales service for replacement.
6