InMotion RS User Manual page 7

Product Function Introduction
Icon Icon Name
Power On/Off
Parking mode
Drive mode
Speedometer
Speed unit
Light icon
Bluetooth icon
Cruise Control
Locking
Fault indicater
Turn signal
Battery level
Horn
Single/Double
Drive Switching
Lcon Description
Press and hold the power button to turn on/off the scooter. It will also automatically power off if there is no activity for
10 minutes, which can be adjusted through the App.
0 represents the Parking mode. The scooter defaults to the Parking mode when it turns on. Press the + or - buttons
to switch to the driving mode. You can also switch and adjust relevant parameters via the app.
1-4 represents drivie mode include four modes.
1 represents Eco mode with a speed limit of 32km/h.
2 represents Normal mode with a speed limit of 64km/h.
3 represents Sport mode with a speed limit of 100km/h.
4 represents Extreme mode, with no speed limit.
The modes can be switched in order by pressing the + or - buttons.
Note: The mode cannot be switched when pressing the throttle.
Shows the speed of the scooter in real time.
The Imperial System and the metric one,you can change the unit via the App .
Press the headlight button to toggle the headlights on or off.
The Icon lights up after the bluetooth connection is successful.
While riding at a constant speed, press the button to activate or deactivate cruise control.Long press to swith single/
dual drive mode.
To use the locking feature, the owner of the scooter must first authenticate themselves through the App. Once
connected, a lock icon will appear on the home screen. Click on the icon to lock or unlock the scooter. If the scooter is
moved while locked, the lights and horn will cycle and then sound a single alarm after 3 seconds.
The icon indicates that the scooter has detected an error. Refer to the error code table to find solutions.
Press the turn signal button, the turn signal on the corresponding side will flash for 5s.
The battery level is indicated by 5 bars, the last bar flashing indicates a low-battery level.
Press the button while the scooter is powered on to honk the horn.
Press and hold the cruise control button while the scooter is stationary to switch between single and double drive
modes. The sequence of switching is Dual Drive -> Rear Drive -> Front Drive, and the driving mode icon will change
accordingly.
5