ASSEMBLY
Open the package:
Take out the 6 connecting buckles and lift the outer
box upwards, revealing the inner packaging and
scooter, and take out the accessory box.
Install the handlebar and front headlight assembly:
Take out four M6*30 cylindrical head screws and
one M8*16 hexagonal socket screw, tighten them
in the corresponding positions according to the
diagram.
Accessory box
Hold the handlebars and unfold the folding stem:
Adjust the height of the stem according to the
scale and lock the stem clamp.
Install the rear mudguard:
Take out four M4*10 cylindrical head screws and
one M4*8 round head hexagonal screw, tighten
them in the corresponding positions according to
the diagram.
10
Fasten the folding wrench:
Fasten the folding wrench according to the
diagram, turn the screw by hand to fix the safety
buckle.
waterproof wire
Connect the waterproof wire:
Connect the corresponding lines according to the
color and follow the directional arrows. (Power
switch key, dashboard, throttle, brake, turn signal,
headlight waterproof wire)
Screw
Folding wrench
Safety buckle