PRECAUTIONS
Do not open SWITCH EZ, 2-SWITCH
Aria is a perfusion system which automates perfusion or timed
injection protocols. It allows for the sequential delivery of up to
devices. Please refer all service issues to our Support department
10 different solutions at the desired flow rate into a microfluidic
(support@fluigent.com)
chip, perfusion chamber or petri dish.
Prevent any objects or liquid from entering the SWITCH EZ. This may
cause a short-circuit or other malfunction. Failing to follow these
instructions may:
•
Expose the user to direct current/voltage if the device is powered.
This may lead to damages.
•
Void device's warranty
•
Discharge our company from any liability regarding physical or
device damages.
Place the product in an stable location with a level surface and good
support.
Do not use other power supply than the one provided with the LineUp
series. The power supply provided with the LineUp
carefully selected to meet the power requirements of the LineUp
series in all configurations and to comply with all safety standards.
If using the SWITCH EZ with other flow control systems, please check
that the pressure in your fluidic system does not exceed the maximum
pressure of the valve being used.
, M-SWITCH
TM
TM
or L-SWITCH
series has been
TM
TM
TM
TM
Need help?
Do you have a question about the LINEUP SWITCH EZ and is the answer not in the manual?