A Appendix - Accessories - Riello 1301 T Installation, Use And Maintenance Instructions

A Appendix - Accessories
Output power regulator kit for modulating operation
With the modulating operation, the burner continually adapts the
power to the request for heat, ensuring great stability for the
parameter controlled: temperature or pressure.
Parameter to control
Temperature
Pressure
Output power regulator with signal 4-20 µA, 0-10V
Two components should be ordered:
• the Analogic signal converter;
• the Potentiometer
Burner
RLS 800/M MX
Potentiometer kit for the indication of load position
Burner
RLS 800/M MX
Soundproofing box kit
Burner
RLS 800/M MX
Kit for the remote fuel selection
Burner
RLS 800/M MX
Gas trains approved according to EN 676
Refer to the instruction manual.
20010305
Appendix - Accessories
Range
- 100...+ 500°C
0...2,5 bar Probe with output
0...16 bar
Potentiometer
Type Code
ASZ... 3010402
Code
3010402
Code
3010376
Code
3010372
Two components should be ordered:
• the output regulator to install on the burner;
• the probe to install on the heat generator.
Probe
Type Code
PT 100 3010110
3010213
4...20 µA
3010214
Analogic signal converter
Type
E5202 3010390
44 GB
Output power regulator
Type
RWF40 BASIC
RWF40 HIGH
Code
Code
3010356
3010357