Maintenance - Frank bSteam bS25 Operating Instructions Manual

Joint:
Brushes:
11.

Maintenance

For the safety of the operator and to ensure an always perfect performance, we
recommend the following checks and maintenance:
AFTER EVERY USE:
For a correct cleaning, it is advice to clean the machine and its accessories with a
clean cloth moistened only with a few drops of water. Do not use alcohol or other
solvents, they may damage the plastics and components.
To maintain efficient and easy to couple the accessories, check the o-ring seal (steam
sealing gaskets) and possibly wet them with a little silicone grease.
This accessory is necessary to use the two
brushes, RECTANGULAR and TRIANGULAR.
Use this joint with the desired brush by
inserting it into its seat, making sure that to
hook it must be rotated of 90° with respect
to the working or vertical position.
These brushes are to use with the
accessory STEAM LANCE. They are used to
remove resistant dirt and for deep cleaning,
even n the corners or small spaces. Choose
the nylon or brass type according to the
surface to be treated.
ALWAYS REMOVE THE PLUG BEFORE CLEANING OR CARRYING
OUT OPERATIONS ON THE MACHINE.
12