Checking The Transaxle-Fluid Level; Changing The Transaxle Fluid - Toro 07411EX Operator's Manual

Checking the
Transaxle-Fluid Level
Service Interval: Every 100 hours
Fluid Type: SAE 80W-90 (API MT-1) or SAE 80W-90
(API GL-5)
1. Park the machine on a level surface.
2. Engage the parking brake.
3. Shut off the engine and remove the key.
4. Remove the fill plug on the transaxle
Note:
The fluid level should be even with the
bottom of the fill plug.
Figure 59
1. Drain plug
5. If the fluid level is low, remove the fill plug and
add the specified fluid until it runs out of the hole
(Figure 59).
6. Replace the fill plug and torque it to 20 to 27
N∙m (15 to 20 ft-lb).
All manuals and user guides at all-guides.com
(Figure 59).
g035761
2. Fill plug
Changing the Transaxle
Fluid
Service Interval: Every 800 hours/Yearly (whichever
comes first)
Fluid Type: SAE 80W-90 (API MT-1) or SAE 80W-90
(API GL-5)
Fluid Capacity: 1.6 L (1.7 US qt)
1. Align a drain pan under the drain plug
59).
2. Remove the fill plug and the seal
Note:
Retain the fill plug and seal for installation
in step 6.
3. Remove the drain plug and the seal, and allow
the fluid to drain completely
Note:
Retain the drain plug and seal for
installation in step 4.
4. Install the drain plug and seal, and torque it to
20 to 27 N∙m (15 to 20 ft-lb).
5. Fill the transaxle with the specified fluid until it
runs out of the fill hole.
6. Install the fill plug and seal, and torque it to 20 to
27 N∙m (15 to 20 ft-lb).
47
(Figure
(Figure 59).
(Figure 59).