Piston Safety Lock
1.
Follow Pressure Relief Procedure, page 18.
2.
Flush Gun, page 23.
3.
Disconnect air (D) and remove fluid manifold (G).
G
4.
Unscrew cap (10) from stop (15), using two pair of
channel-lock pliers. Inspect spring (17), safety
actuator (3), bushing (4), and o-rings (14, 18).
15
18
14
5.
Lubricate o-rings (14, 18) and piston safety lock
actuator (3), and reassemble. Use Fusion Gun
Lubricant 118665. Clean threads with solvent or
alcohol. Apply medium-strength Loctite® or equiv-
alent to threads on stop (15) and cap (10), and
reassemble.
6.
Attach fluid manifold. Connect air. Return gun to
service.
310648E
D
TI4968a
3, 4
10
17
TI3835b
Air Valve
1.
Follow Pressure Relief Procedure, page 18.
2.
Flush Gun, page 23.
3.
Disconnect air (D) and remove fluid manifold (G).
G
4.
Unscrew air valve plug (2) and remove spring (26).
Using small screwdriver (54), push spool (27) out
from front. Inspect o-rings (24).
24
5.
Liberally lubricate o-rings and reassemble. Use
Fusion Gun Lubricant 118665. Torque plug (2) to
125-135 in-lb (14-15 N•m).
6.
Attach fluid manifold. Connect air. Return gun to
service.
Repair
D
TI4968a
2
26
27
TI4990a
41