Table of Contents
Advertisement
UPS Expandable Runtime Battery User Manual
Required Tools
#2 Phillips Screwdriver
•
WARNING
AVERTISSEMENT
Introduction
This User Manual provides information about your NEXSYS UPS Expandable Runtime Battery option (A), part of the
NEXSYS power devices offered by Middle Atlantic Products. You may have purchased additional items (some sold
separately) for your NEXSYS UPS configuration.
For information about additional products that are part of the NEXSYS series, refer to respective documents available on
the NEXSYS product page at
(866) 977-3901.
Some General Model and Compatibility Specifications
For more specification details see "Specifications" on page 24.
Model
Compatible with UPS Topology
Compatible with UPS sized VA
Charging Your Expandable Runtime Battery, the First
Time
You must first charge your expandable runtime battery (A) for at least eight hours before connecting it to your UPS and
providing direct backup power to connected devices.
After configuring your entire UPS system to include an expandable runtime battery, the UPS auto charge feature
automatically charges all pre-installed, internal batteries whenever the UPS is plugged directly into an appropriately rated
AC power receptacle using the supplied power cord (D), whether the UPS is turned on or off.
NOTE
Use tools with caution and follow all safety protocols.
Utiliser des outils avec prudence et suivre tous les protocoles de sécurité.
www.legrandav.com
1000VA
First, use the supplied power cord (D) and directly plug your expandable runtime battery
into AC power and allow it to charge for eight hours before connecting it to your UPS and
providing direct backup power to connected devices.
©2022 |
Electric Drill and #2 Phillips Bit (if Preferred)
•
or contact support at
av.middleatlantic.techsupport@legrand.com
UPX-EXPANRUN-10-15
Line Interactive
1500VA
xii
Legrand AV,
Inc. All rights reserved.
Required Tools
or
UPX-EXPANRUN-20
2000VA
Advertisement
Table of Contents
