Check Sheet - ECO2 Systems SANCO2 GS4-45HPC-D Installation Manual

Check Sheet

Check sheet
Safety items
Fix the legs of the tank unit in place with anchor bolts if necessary. Fix the legs of the tank unit in place with anchor bolts if necessary.
The floor has been properly waterproofed and properly drained. The floor has been properly waterproofed and properly drained.
Fix the legs of the tank unit in place with anchor bolts if necessary.
The earth leakage breaker can be turned off with the test button. The earth leakage breaker can be turned off with the test button.
The floor has been properly waterproofed and properly drained.
Earth (ground) work is implemented. Earth (ground) work is implemented.
The earth leakage breaker can be turned off with the test button.
The tank unit is installed on a level sturdy surface. The tank unit is installed on a level sturdy surface.
Earth (ground) work is implemented.
There are no gas containers or flammable materials anywhere near the unit. There are no gas containers or flammable materials anywhere near the unit.
The tank unit is installed on a level sturdy surface.
The wiring between the tank unit and the heat pump unit is properly connected. The wiring between the tank unit and the heat pump unit is properly connected.
There are no gas containers or flammable materials anywhere near the unit.
The wiring between the tank unit and the heat pump unit is properly connected.
Heat Pump & Tank Heat Pump & Tank
Heat Pump & Tank
A concrete base block is installed (if necessary). A concrete base block is installed (if necessary).
An inspection space is retained in accordance with the installation manual An inspection space is retained in accordance with the installation manual
A concrete base block is installed (if necessary).
An inspection space is retained in accordance with the installation manual
Water Piping Water Piping
Water Piping
A dedicated water supply shut off valve is installed A dedicated water supply shut off valve is installed A dedicated water supply shut off valve is installed
The piping for the hot water supply has been properly insulated. The piping for the hot water supply has been properly insulated.
The piping for the hot water supply has been properly insulated.
A dedicated water supply shut off valve is installed
There is no water leaking from the water supply/hot water supply and heat pump There is no water leaking from the water supply/hot water supply and heat pump
There is no water leaking from the water supply/hot water supply and heat pump
The piping for the hot water supply has been properly insulated.
pipes.
pipes. pipes.
There is no water leaking from the water supply/hot water supply and heat pump
In areas subject to snap freezes, protection is provided. In areas subject to snap freezes, protection is provided.
In areas subject to snap freezes, protection is provided.
pipes.
Union joints are used so that the parts can be easily removed. Union joints are used so that the parts can be easily removed.
Union joints are used so that the parts can be easily removed.
In areas subject to snap freezes, protection is provided.
Piping is installed from the drain outlet on both PR Valve & Heat Pump drain Piping is installed from the drain outlet on both PR Valve & Heat Pump drain
Piping is installed from the drain outlet on both PR Valve & Heat Pump drain
Union joints are used so that the parts can be easily removed.
It is not necessary to install a drain pipe to the heat pump unit of the
The filter in the pressure-reducing valve is clean. The filter in the pressure-reducing valve is clean.
Piping is installed from the drain outlet on both PR Valve & Heat Pump drain GS4-45HPC-D model.
The filter in the pressure-reducing valve is clean.
Independent pipes, not a twin tube, are used for the heat pump unit pipes Independent pipes, not a twin tube, are used for the heat pump unit pipes
The filter in the pressure-reducing valve is clean.
(insulated, UV stabilised) (insulated, UV stabilised)
Independent pipes, not a twin tube, are used for the heat pump unit pipes
Independent pipes, not a twin tube, are used for the heat pump unit pipes
Mixing/Anti Scald valve is installed and the setting is correct Mixing/Anti Scald valve is installed and the setting is correct
(insulated, UV stabilized)
(insulated, UV stabilised)
Mixing/Anti Scald valve is installed and the setting is correct
Pressure reduction valve (95PSI) has been fitted to the cold water supply Pressure reduction valve (95PSI) has been fitted to the cold water supply
Mixing/Anti Scald valve is installed and the setting is correct
Pressure reduction valve (95PSI) has been fitted to the cold water supply
During draining of the tank, water does not overflow from the drain. During draining of the tank, water does not overflow from the drain.
Pressure reduction valve (95PSI) has been fitted to the cold water supply
During draining of the tank, water does not overflow from the drain.
During draining of the tank, water does not overflow from the drain.
Installed By............................................................ Date....................................... Installed By............................................................ Date.......................................
Installed By............................................................ Date.......................................
Inspected By .......................................................... Date....................................... Inspected By .......................................................... Date.......................................
Inspected By .......................................................... Date.......................................
Action
Sanden Heat Pump – Installation Manual
Page 37 of 40
Action Action
Action
Action Action
Action
Action
SANCO Heat Pump – Installation Manual
2
Page 40 of 44
Completed
Completed Completed
Completed
Completed Completed
Completed
Completed