ECO2 Systems SANCO2 GS4-45HPC-D Installation Manual page 38

Labor costs are paid per the payment cost schedule published by Eco2 Systems LLC and revised from
time to time at Eco2 Systems LLC's requirement.
Labor warranty specifically excludes (unless agreed to in writing prior to service being carried out) costs
associated with travel to and from jobsites, distributors or contractors place of business, initial fault
diagnosis and subsequent work due to incorrect diagnosis of fault or additional faults due to poor
replacement practice of the failed part, delivery costs associated with replacement parts or units, or any
other such administrative costs. These costs are to be the responsibility of the owner.
Labor expense reimbursement by part or action (USD) as of 12/01/2020
i. PCB replacement
ii. Thermistor replacement
iii. Controller replacement
iv. Fan motor replacement
v. Pump replacement
vi. Expansion valve coil replacement
vii. Other miscellaneous component replacement
viii. Fan blade replacement
ix. Complete unit replacement (Heat Pump or Tank)
S A N C O 2 W a r r a n t y P o l i c y 1 2 - 0 1 - 2 0 2 0
Exhibit A: Labor Costs
SANCO Heat Pump – Installation Manual
2
Page 38 of 44
$100
$75
$75
$75
$100
$75
$100
$75
$210
6 | P a g e