Processor - HP 280 G4 MT Maintenance And Service Manual

Processor

Description
Intel i5-8400, 6C, 2.8 GHz, 65W 9 MB
Intel i7-8700, 6C, 3.2 GHz, 65W, 6 MB
Intel i5-8500, 6C, 3.0 GHz, 65W, 9 MB
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
4. Remove the slim optical drive
5. Remove the drive cage
6. Remove the fan sink
7. Rotate the locking lever to its full open position (1).
8. Raise and rotate the microprocessor retainer to its fully open position (2).
9. Lift the processor (3) straight up and remove it.
CAUTION:
could cause irreparable damage. Once pins are damaged it may be necessary to replace the system board.
Reverse the removal procedure to install a new processor.
42 Chapter 4 Removal and replacement procedures
(Access panel on page
(Front bezel on page
(Removing a slim optical drive on page
(Drive cage on page
(Fan sink on page
Do NOT handle the pins in the processor socket. These pins are very fragile and handling them
Description
Intel i3–8011, QC, 3.6 GHz, 65W 6 MB
Intel G-4900 DC 3, 1 GHz, 65W, 2 MB
(Preparation for disassembly on page
17).
18).
19).
40).
16).
29).