Download Print this page

Cornwell Tools CAT-250AR Operating Instructions, Warning Information, Parts Breakdown

1/4" mini air ratchet

Advertisement

Quick Links

Operating Instructions • Warning Information • Parts Breakdown
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how often
you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
SPECIFICATIONS
Working Torque . . . . . . . . . . . . . .5-18 ft. lbs.
Max. Torque . . . . . . . . . . . . . . . . . .30 ft. lbs.
Max. Free Speed . . . . . . . . . . . . . . . .240 rpm
Recom. Air Pressure . . . . . . . . . . . . . .90 psig
Overall Length . . . . . . . . . . . . . . . . . . . .7.25"
Weight . . . . . . . . . . . . . . . . . . . . . . . .1.4 lbs.
Air Consumption . . . . . . . . . . . . . . . . . .3 cfm
CAT-250AR
1
• MAXIMUM RPM OF 240
• MAX AIR PRESSURE: 90 PSIG,
6.2 BAR
• RPM OF THE ACCESSORY
MUST EXCEED TOOL RPM
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
CAT-250AR
1/4" Mini Air
Ratchet
Rev. 9/19/02

Advertisement

loading
Need help?

Need help?

Do you have a question about the CAT-250AR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Cornwell Tools CAT-250AR

  • Page 1 Max. Torque ....30 ft. lbs. CAT-250AR Max. Free Speed ....240 rpm Recom.
  • Page 2 See instructions for correct set-up. • Air powered tools can vibrate in use. Vibration, repetitive motions or uncomfortable positions over extended periods of time may be harmful to your hands and arms. Discontinue use of tool if CAT-250AR Rev. 9/19/02...
  • Page 3 Cornwell be liable for any incidental or consequential damages. Note: Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. CAT-250AR Rev. 9/19/02...
  • Page 4 Friction Spring 62516 Cylinder Steel Ball 62517 Front End Plate Thrust Washer 30524 Ball Bearing Retaining Ring 62519 Washer 62542 Exhaust Deflector 62520 Internal Gear * Available only as a head kit, part # CAT-250AR-K 62521 Planet Gear CAT-250AR Rev. 9/19/02...