Phanteks GLACIER C370A Installation Manual

P H A N T E K S G L AC I E R C370A
PH-C370A_BK | WT

PACKAGE CONTENTS

WARNING - This product is intended for advanced users. Improper installation may result in damage to your equipment. While all eorts have been made to
provide the most comprehensive information possible, Phanteks assumes no liability expressed or implied for any damage(s) occurring to your components
as a result of using Phanteks cooling products, either due to mistake or omission on our part in the below instructions, or due to failure or defect in the
Phanteks cooling products. Do not disassemble the water block. Warranty will be voided.
F O R I N S TA L L AT I O N O F A M4 | A M5

STEP 1 - REMOVE BRACKETS

Remove the stock plastic brackets from the AM4/AM5
socket.

STEP 2 - SECURE STAND-OFFS

With the stock plastic brackets removed, secure the
backplate with the 4x AMD standoffs. This step is
compatible with both AM4 as AM5.

STEP 3 - APPLY THERMAL PASTE

Apply the thermal paste to the center of the CPU in
an X-shape.
GLACIER
C370A
QTY: 1
THERMAL PASTE
QTY: 1
3mm ALLEN KEY
QTY: 1
INSTALLATION GUIDE
AMD STANDOFF
QTY: 4
D-RGB MOTHERBOARD
ADAPTER
QTY: 1
*Please do not disassemble the water block. Warranty will be voided.
VERSION 1.0