YASKAWA VS-616PS5 Series Quick Start Manual page 52

PG-P2 Setup
F8 – 02 Pulse Input Moving Average Value
Sets the number of scans the pulse input reference signal is averaged over. A larger number will provide a more
stable reference (internal). However, the inverter response to a rapid change in the pulse train frequency may be
slow. A setting of "0" or "1"means no moving average will be used, and the pulse input reference will be updated
every scan.
Minimum Maximum Description Default Setting
0 50 Pulse Input moving Scan width. 0
51
VS-616PS5 Installation & Quick Start Manual