Installing The Add-On Card Aoc-Atg-I4S (With 1U Bracket) - Supermicro AOC-ATG-i4SG User Manual

3-3 Installing the Add-on Card AOC-ATG-i4S (with 1U
bracket)
Follow the steps below to install an add-on card into your system. (If the system is
fixed onto a rack, the removal of the server top cover is not required. If the system
is not anchored to a fixed structure, it is recommended to remove the system top
cover for ease of installation.)
A. Uninstalling an AIOM module
1. Slide the black latch to the left to the "unlock" position, then disengage the
AIOM module from the chassis structure by pushing the blue latch once to
extend it outward.
2. Pull the blue latch to disengage the AIOM module from the motherboard con-
nector, then gently slide the AIOM module out.
The latch to engage/
disengage the AIOM
module
Remove the AIOM
card from this slot
The AIOM card with
the bracket installed
3-3
Chapter 3: Installation