Led Indicators And Connectors - Supermicro AOC-ATG-i4SG User Manual

2-3

LED Indicators and Connectors

LAN Ports
The AOC-ATG-i4S(M)(G) has four network LAN (SFP+) ports. These LAN ports
support connection speeds up to 10Gbps per port. Plug the Direct Attached Copper
(DAC) cable into the SFP+ port for network connections.
Note 1: To make sure that the LAN port functions properly, be sure to use
the following cables specified by the manufacturer:
•
Direct Attached Twin-Axial Copper cable, or
•
Short-range or long-range fiber optic cable used in conjunction with
the optional optical transceiver.
Note 2: For detailed information on manufacturer-recommended cables
and transceivers, please visit
resources/aoc/cables-transceivers.
Link/Activity LED Indicators
Each SFP+ connector has two LEDs per port at the bottom of the PCB. Please
refer to the table above for LED color definition.
LED Color
Link Amber
(Left)
Green
Activity Green Flashing
(Right)
Chapter 2: Hardware Components
https://www.supermicro.com/en/support/
Definition
1G Link Speed
10G Link Speed
Activity
2-5