Jumper Settings - Supermicro AOC-ATG-i4SG User Manual

Super AOC-ATG-i4S(M)(G) Add-on Card User's Guide
2-4

Jumper Settings

Explanation of Jumpers
To modify the operation of the card, jumpers can be used to choose between
optional settings. Jumpers create shorts between two pins to change the function
of the connector. Pin 1 is identified with a square solder pad on the printed circuit
board. See the motherboard layout pages for jumper locations. The Standby Power
default state is Enable (Pins 1-2).
JPAUX1 for
Standby Power
Disable = No
standby power to
AOC NIC
Enable = Standby
power to AOC NIC
JPAUX1 for
Standby Power
Disable = No
standby power to
AOC NIC
Enable = Standby
power to AOC NIC
IPMI Support
Yes, but no
function in S5
Yes
Function
Disable jumper to dis-
connect the standby
power
Enable jumper to con-
nect standby power to
AOC NIC
2-6
FailOver Support
Yes, but no function
in S5
Yes
No standby power in standby
mode (S5 state).
WoL (Wake on LAN) is sup-
ported but limited to plat-
forms with sufficient airflow
when it is in standby mode
(S5 state). Please consult
Supermicro before enabling
it.
WoL Support
No
Yes
Notes