Installing The Add-On Card (With 0.5U Bracket) - Supermicro AOC-A100G-b2CG User Manual

3-3

Installing the Add-on Card (with 0.5U bracket)

Follow the steps below to install an add-on card into your system. (If the system is
fixed onto a rack, the removal of the server top cover is not required. If the system
is not anchored to a fixed structure, it is recommended to remove the system top
cover for ease of installation)
A. Uninstalling an AIOM module
1. Unscrew the blue knob from the system.
2. Pull on the tab and a knob evenly on both sides of the card to disengage the
AIOM module from the motherboard connector, then gently slide the AIOM
module out.
Pull tab to
engage/disengage
Screw knob to
engage/disengage
3-3
Chapter 3: Installation
Remove the AIOM
card from this slot
The AIOM card with
the 0.5U bracket
installed