Cleaning
Only clean the device with a standard bathroom cleaner, clear tap water and a lint-free cloth. Aggressive
cleaning agents can damage the device. Dry the device with a lint-free cloth.
Cleaning the device
8
1
10
1. Open all locking clips
2. Take the top part
3. Remove the filter unit
4. Thoroughly rinse the filter unit with plain tap water.
5. Rinse the device after each use with plain tap water inside and out.
The device is clean.
Storage
The handle might become damaged if the device is stored on its head.
- Never set down the device on its head.
1. Thoroughly clean the device (see section "Cleaning").
2. Let all parts dry completely.
3. Fully charge the device.
Recharging is required after at latest 3 months due to self-discharge.
4. Then store the device and its accessories in a dry and frost-free place (≥ +5 °C) without direct
sunlight.
26
.
10
off.
1
.
2
9
2
NOTICE!
Need help?
Do you have a question about the Poolrunner Battery Basic and is the answer not in the manual?