Setting The Decimal Points - Royal 600sc Instruction Manual

6 Press the keys to spell BOOK, using the Department keys or the
Important
If you enter the wrong character, press the Void key to backspace and delete
that character and then continue.
7 Press the Check key. The PLU information is saved in the cash register.
8 Repeat steps 4 through 7 to program more PLUs.
9 When you are done programming PLUs, press the Qty/Date key.

Setting the Decimal Points

The decimal point is set by selecting from the following 4 options:
After you program the decimal point, you do not need to specify a decimal
when you ring up sales. If you try to use a decimal point, you hear an error
beep.
After you are done, you can check your results. See Running the Program
Confirmation Report on page 73.
To program the decimal points
Example 14: Program the Decimal Point For Option $X.XX, 2 decimal places,
normally used in the United States
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
Alpha 600sc User's Guide
information about using the department keys, see Assigning Department
Number Keys on page 41.
Alphanumeric Code Chart, if needed. For an explanation of how to use
the Department keys to spell words, see Setting Alphanumeric
Descriptions on page 20. The Department Shift key lets you use the
letters in the lower green area on the Department keys.
To make a space to separate words, press the 0 key twice or press the 00
key one time.
You must enter a description, even if it is as simple as PLU4.
This decimal point...
zero decimal point
one decimal point
two decimal point
three decimal point
Looks like...
0 = $ X
1 = $ X.X
2 = $ X.XX (U.S. Standard)
3 = $ X.XXX
Setting the Decimal Points
53