Royal 600sc Instruction Manual page 35

To set clerk numbers
Example 4: For Clerk #1, Security number is 234
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 Using the round Number keys, press 444444 and then press the
4 Using the round Number keys, press 1 for Clerk #1 and then press 234
5 Repeat Step 4 for adding Clerks 2 through 26.
6 When you are done programming Clerk Numbers, press the Clear key.
7 Before you can use Clerk Numbers, you must activate the Clerk System
To program a clerk name
Example 5: For Clerk #1, program name as Sally Smith
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 Using the round Number keys, press 1 for Clerk #1 and then press the
4 To program a name, press the Department keys or the Alphanumeric
5 Press the Check key when you are done.
To use clerk numbers
Example 6: Clerk #1 has a passcode of 234
1 Put the PRG key in the Mode key slot and turn it to either the REG1 or
2 Using the round Number keys, press 1, then press the Clerk key. Press
Alpha 600sc User's Guide
and then press the Check key. If you did not program a Manager
Password, go to the next step.
Amount Tend Total key. The letter C appears in the Customer Display
and Clerk Pass appears in the clerk display until Step 6 is complete.
for the Security number and press the Clerk key.
by selecting Option #1 on Flag 12. Do the following:
Press 121 and then press the Void key.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
Return key.
Code Chart, as needed. For an explanation of how to use the
Department keys to spell words, see Setting Alphanumeric Descriptions
on page 20. Remember, the Department Shift key lets you use the letters
in the lower green section on the Department keys. To make a space to
separate words, press the 0 key twice or press the 00 key one time.
REG2 position.
234 and then press the Check key.
Setting Clerk Numbers and Names
29