Royal 600sc Instruction Manual page 56

Chapter 5: Setting Up Your Cash Register - Advanced
Note
If you want to use Departments 19 and 20 as credit card keys, they no longer
work as department keys until you set Flag 16 back to 0.
To program a credit key
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 To program a card name that prints on the receipt or journal tape, press
4 Type the name of the credit card just as you did when you programmed
Important
If you enter the wrong character, press the Void key to backspace and
delete that character. Now you can continue.
5 When you are done, press the Check key.
50
and then press the Check key. If you did not program a Manager
Password, go to the next step.
51 for Department key 20 or press 52 for Department key 19 and then
press the Return key. If you do not program a card name, it prints as
CREDIT 1 or CREDIT 2.
Department names. You can type up to 12 characters and spaces.
For example, to type VISA, press the following keys:
Press this key...
• For more information about using the Department keys to type letters,
see Programming Department Keys on page 37.
To get this letter...
V
I
S
A
Alpha 600sc User's Guide