Royal 600sc Instruction Manual page 44

Chapter 5: Setting Up Your Cash Register - Advanced
4 To add another department, do step 3 again.
To program Department 1 as taxable with no preset price and no
description
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 Using the round Number keys, press 00001 and then press the
4 Using the round Number keys, press 0 and then press the Dept 1 key.
5 Press the Amount Tend/Total key. Skip this step if you are going to enter
To program Department 2 as non-taxable with no preset price and no
description
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
38
Press this...
00 to 15
and then
0 or up to a 7 digit
price
A department key
Note
If you do not want to program a
department name, press the Amount
Tend/Total key.
Skip the next steps. You are done with this
department.
The alphanumeric
keys to spell the
department name.
The information is saved in the cash register
and then press the Check key. If you did not program a Manager
Password, go to the next step.
Subtotal/w/Tax key.
a description. The department information is saved in the cash register.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
To specify this...
Tax status
Department preset value
The department key for
this department
The department name
Alpha 600sc User's Guide
See this page...
40
41
42