Setting The Idle Messages - Royal 600sc Instruction Manual

Chapter 5: Setting Up Your Cash Register - Advanced
To program the Sales message stop time setting
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 Using the round Number keys, press 4, press the number of seconds

Setting the Idle Messages

To program the Idle message display after the time appears
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 Using the round Number keys, press 50, press the number of seconds
To program the Idle message pattern
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
3 Using the round Number keys, press 60, press 0 or 1 for your message
48
and then press the Check key. If you did not program a Manager
Password, go to the next step.
you want to delay as 2 digits, and press the Charge key.
Idle message Number of seconds for the Time
display after the to appear before the Idle
time appears message appears again.
When the Time changes while an
Idle message is running, the time
appears for a few seconds. After
the specified time, the Idle
message appears again.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
you want to delay as 1 digit, and press the Charge key.
Idle message Setting the Idle message to 0
pattern runs Idle message 1 in the AM
and Idle message 2 in the PM.
Setting the Idle message to 1
combines both Idle messages
and runs them all day.
and then press the Check key. If you did not program a Manager
Password, go to the next step.
display choice, and press the Charge key.
Settings in
seconds: 0 – 9
0 does not show
the time at all.
Default=5
Settings: 0 – 1
Default=0
Alpha 600sc User's Guide