Table of Contents
Advertisement
Section 3: Configuration
In this section, you may configure the video image settings for your camera. All changes in the Image Settings section will be made immediately.
For the other sections, after making any changes, click the Save button to save your changes.
Image Settings
Mirror:
This will mirror the image horizontally.
Flip:
This will flip the image vertically. When turning Flip on, you may want to
consider turning Mirror on as well.
Anti-Flicker:
Select the frequency used by your power frequency to avoid interference.
Use the drop-down box to change white balance settings to help balance
White Balance:
colors for different environments. You can choose from Auto, Outdoor,
Indoor, Fluorescent, and Push Hold. If you choose Push Hold, hold a white
card or grey card in front of the camera, then click the Save button to set the
camera's white balance.
Changes the exposure mode. Use the drop-down box to set the camera for
Exposure
Indoor, Outdoor, or Night environments, or to Moving to capture moving
Mode:
objects. The Low Noise option will focus on creating a high-quality picture
without noise. You can also create 3 different custom exposure modes. Max
Gain will limit the brightness of the exposure.
This setting controls the amount of noise reduction that will be applied to
Denoise:
the picture.
This setting controls the amount of 3D denoise that will be applied to the
3D Denoise:
picture. 3D denoise reduces the amount of image noise when viewing a low-
light environment.
D-Link DCS-4625 User Manual
Image Settings
32
Advertisement
Table of Contents
