Canon imageRUNNER ADVANCE C7500 Series Customer Expectation Document page 50

Staple Finisher-X1 Table Continued
Item
Capacity Per Tray
IMPORTANT
The Staple Finisher-X1 can staple any other paper type except, Transparencies,
Tracing Paper, and Labels.
18 If the customer is using Thin Paper or Custom Size Paper (less than 15 lb bond (59 g/m
sheets (or 3 7/8" (97 mm) in height).
19 1 Point Front (Diagonal), 1 Point Back (Diagonal), Two Points Center (Parallel).
20 The optional Paper Folding Unit-J1 must be attached.
Version 3 imageRUNNER ADVANCE C7500 Series Customer Expectations Document
imageRUNNER ADVANCE C7500 Series Customer Expectations Document
Tray Mode
No Collating, Collate,
and Group
Offset (Collate &
Group)
No Collating, Collate,
and Group with
Different Paper Sizes
A
Staple Mode
Z-Fold Mode
Half Fold Mode
No Collating, Collate,
and Group Mode
B
No Collating, Collate,
and Group with
Different Paper Sizes
Z-Fold Mode
Half Fold Mode
Specifications
LTR, EXEC, and STMTR:
1,500 sheets (or 7 3/4" (195 mm) in height)
13" x 19", 12 5/8" x 17 11/16", 12" x 18",
11" x 17", LGL, LTRR:
750 sheets (or 3 7/8" (97 mm) in height)
LTR and EXEC:
1,500 sheets (or 7 3/4" (195 mm) in height)
11" x 17", LGL, and LTRR:
750 sheets (or 3 7/8" (97 mm) in height)
750 sheets (or 3 7/8" (97 mm) in height)
LTR and EXEC:
1,500 sheets/100 sets (or 7 3/4"
(195 mm) in height)
19
11" x 17", LGL, and LTRR:
750 sheets/50 sets (or 3 7/8" (97 mm) in
height)
11" x 17":
30 sheets (or 7 3/4" (195 mm) in height)
20
LGL and LTRR:
10 sheets
20
LTRR: 10 sheets
LTR, EXEC, and STMTR:
250 sheets (or 1 1/4" (32 mm) in height)
11" x 17", LGL, LTRR:
125 sheets (or 5/8" (16 mm) in height)
Paper with a length longer than 17" (432 mm):
30 sheets
LGL, LTR, LTRR, EXEC, STMTR
125 sheets (or 5/8" (16 mm) in height)
Paper with a length longer than 17" (432 mm):
30 sheets
20
11" x 17", LGL, LTRR: 10 sheets
20
LTRR: 10 sheets
2
)), the tray can hold approximately 750
Paper Size
18
18
18
Page 50