Table of Contents
Advertisement
Industrial PCs OPC5015
1.7 S
TANDARDS
The device meets the requirements and objectives of the following EC directives:
•
•
•
•
Note:
The manufacturer keeps a corresponding declaration of conformity for the responsible
authorities and can present that document upon request.
In order for the device to comply with the legal requirements pertaining to
electromagnetic compatibility, all connected components and cable connections have to
meet these requirements as well. Therefore shielded bus and LAN cables with shielded
plugs should be used and installed as specified in this manual.
1.8 M
ODELS
Two models of the system are provided:
Platform with CompactFlash:
This platform has no rotating mass storage media (e.g. hard drives) and incorporates an
embedded operating system (Windows CE.net / XP embedded) for stationary use.
Platform with hard drive:
This model includes a hard drive for stationary use in production environments and
incorporates standard operating systems.
1.9 S
COPE OF DELIVERY
Shipment includes the following:
•
•
•
•
Optional components
•
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
The device complies with the test specifications for the CE label according to the
European test standards EN 55022 and EN 50082-2.
The device complies with the test specifications DIN EN 60950 (VDE 0805, IEC
950) "Safety of Information Technology Equipment".
The device complies with the DIN EN 60068-2-6 (sinusoidal vibration) test
specifications.
The device complies with the DIN EN 60068-2-29 (bump) test specifications.
1 device
Power plug:
Fastener set for control cabinet
Service CD
Operating system
3 pin Phoenix Contact COMBICON MC 1.5/3-GF-3.81 feed-
through header (already mounted in the device socket)
7
Advertisement
Table of Contents
