Adjusting The Motion-Control Levers - Toro TimeCutter HD MyRide Operator's Manual

Adjust the rear-shock assemblies
Figure 10
(Figure 10).
g195746
g195745
17
Adjusting the
Motion-Control Levers
Adjusting the Height
You can adjust the motion-control levers higher or
lower for maximum comfort
Figure 11
Adjusting the Tilt
You can adjust the motion-control levers forward or
rearward for your comfort.
1. Loosen the upper bolt holding the control lever
to the control-arm shaft.
2. Loosen the lower bolt just enough to pivot the
control lever forward or rearward
3. Tighten both bolts to secure the control lever in
the new position.
4. Repeat the adjustment for the other control lever.
(Figure 11).
g027252
(Figure 11).