Lincoln Electric Vantage 549 Operator's Manual page 31

VANTAGE 549
parallelinG
When paralleling machines in order to combine their outputs, all
units must be operated in the CC-STICK mode at the same output
settings. To achieve this, turn the WELD MODE switch to the CC-
STICK position. Operation in other modes may produce erratic
outputs, and large output imbalances between the units.
The following additional modes can be accessed via an ArcLink feeder
Dia. Steel
Argon
inches CO2 Mix
.030 • •
.035 • •
.040 • •
.045 • •
3/64
0.052 • •
1/16 •
Pulse Modes
Dia. Steel Stainless
Argon Argon
inches Mix Mix
0.035 • •
0.045 • •
3/64
0.052 •
1/16 • •
Synergic CV Modes
Metal
Stainless Core
Argon
Mix Tri-Mix Argon Mix
• •
• •
• • •
•
•
Aluminum
4043 5356
• •
• •
Flux Core Aluminum
Argon
Mix CO2 4043 5356
• •
•
•
B-13
OPERATION
•
•